Classroom Technology Guide
Click on the tabs below to find out more information on using the technology in the classrooms.
Classroom Technology Instructions
- Pull out drawer on teaching station
- Press the space bar on the keyboard a few times to turn on the computer and wake up the Wacom tablet
3. Sign in with your NDUS identifier and password
- Click on the Windows icon
- Click on Wacom Tablet Properties
3. Click on the calibrate tab
4. Click on calibrate
5. To calibrate the pen, click on the + symbols (there will be four total, one in
each corner). If the calibration + show up on the wrong screen, press the ESC key,
select the other monitor from the drop down list under “monitor”
1. Click on the Windows icon
2. Click on Wacom Tablet Properties
3. Click on the pen tab
4. Click on the drop down menus
5. Choose disabled
1. On the button right of the desktop, right click on the speaker
2. Click open sound settings
3. Maximize the screen on the top right
4. Click on sound control panel
5. Right click on the speaker
6. Click on test
1. On the button right of the desktop, right click on the speaker
2. Click on open sound settings
3. Maximize the screen on the top right
4. Click on sound control panel
5. Right click on recording
6. Right click on microphone and click on properties
7. Click on levels and adjust to preference using the slider
1. Click on the Zoom icon on the desktop
2. Click sign in
3. Click sign in with SSO
4. Enter UND and click continue
5. Sign in with your NDUS identifier and password
6. Choose which meeting you would like to start and click start
7. Click join with computer audio
1. Click share screen
2. Click advanced
3. Click content from 2nd camera
4. Click share5. Click switch camera
1. Click on the Yuja icon on the desktop
2. Choose single sign on and UND from the dropdown menus
3. Click sign in
4. Give the capture a title if you would like (you can do this after recording as
well).
5. Select the YuJa course folder to store the capture in
6. Select your video/camera sources
7. Select your audio sources and verify your microphone is metering in the yellow
range. Adjust microphone level if necessary.
8. Select your screen capture area
9. Click Start. There will be a three second countdown before your recording will
begin
1. Click video
2. Choose which Document Camera you are using. The options will either be EPSON ELPDC21 or AV.io 4k HD Video
1. Choose video source to display projectors/monitors
To turn on projectors and lower screens
2. Press on
3. Press screens down
To turn projectors off and raise screens
4. Press screens up
5. Press and hold off for five seconds
Sanitizing Surfaces
Use a sanitizing wipe to wipe down the podium and teaching station before and after class. Please do not use these wipes on the Wacom tablet or other screens.
Sanitizing Tech Equipment
Use sanitizing wipe to wipe down the technology euipment before and after class.
Place a disposable dry wipe on top of the plunger can and push down. The wipe will become wet with disinfectant. Wipe down all electronics.
Spray disinfectant on a disposable dry wipe and wipe down all electronics. Please do not spray directly on technology equipment.